UNIDENTIFIED

SUN-2110

  Data bus:                16-bit, ISA

  Size:                    Three/quarter-length, full-height card

  Hard drive supported:    Two IDE (AT) Interface drives

  Floppy drives            Two 360KB, 720KB, 1.2MB, or 1.44MB drives
  supported:

[Image]

                              CONNECTIONS

                    Function                           Location

  15-pin game port - internal                             J1

  34-pin control cable connector - floppy drive           J2

  10-pin serial port (COM2/4) - internal                  J3

  10-pin serial port (COM1/3) - internal                  J4

  15-pin analog VGA port - external                       J5

  25-pin parallel port (LPT1/2/3) - external              J6

  40-pin IDE(AT) Interface connector                      J7

  26-pin video feature connector                          J8

  2-pin connector - Drive active LED                     LED1

                        USER CONFIGURABLE SETTINGS

               Function                     Location          Setting

      VGA connector enabled                   JP1            pins 1 & 2
                                                               closed

      VESA feature connector enabled          JP1            pins 2 & 3
                                                               closed

      Monochrome video mode enabled           JP2              closed

      Color video mode enabled                JP2               open

      Interlaced video mode enabled           JP3              closed

      Non-interlaced video mode               JP3               open
      enabled

  »   Hard drive enabled                  JP4/jumper 1         closed

      Hard drive disabled                 JP4/jumper 1          open

  »   Game Port (J1) enabled              JP4/jumper 2         closed

      Game Port (J1) disabled             JP4/jumper 2          open

  »   Floppy drive enabled                JP4/jumper 3         closed

      Floppy drive disabled               JP4/jumper 3          open

  »   Serial Port 1 (J4) enabled          JP4/jumper 4         closed

      Serial Port 1 (J4) disabled         JP4/jumper 4          open

  »   Serial Port 2 (J3) enabled          JP4/jumper 7         closed

      Serial Port 2 (J3) disabled         JP4/jumper 7          open

  »   Serial Port 1 (J4) is set to        JP4/jumper 8          open
      COM1

      Serial Port 2 (J3) is set to
      COM2

      Serial Port 1 (J4) is set to        JP4/jumper 8         closed
      COM3

      Serial Port 2 (J3) is set to
      COM4

        PARALLEL PORT (J6) CONFIGURATION

      LPT         JP4/jumper 5    JP4/jumper 6

  LPT1 enabled        open           closed

  LPT2 enabled       closed           open

  LPT3 enabled       closed          closed

    Disabled          open            open